Research and development direction of polluted soil treatment technology

After more than 10 years of research and application, system of contaminated soil remediation technology including physical / chemical remediation, bioremediation repair and remediation, has been formed, and accumulated the application experience of repairing comprehensive engineering and soil pollution, the new research hotspot of the in situ bioremediation of contaminated soil and based on monitoring the natural repair technology appeared. The future research of polluted soil treatment technology is developed from the following aspects:


1.To develop green soil bioremediation technology

Soil bioremediation is more stringent for environmental requirements, such as soil properties, temperature, pH value, and nutritional conditions. This needs to be constantly adjusted in the process of practice and ultimately to find the best condition. For the hyperconcentration plants, they need be collected at the appropriate time and take reasonable treatment and disposal methods. Not only can avoid second pollution, but also can improve the economic benefit. Therefore, bioremediation, especially the technique of phytoremediation, will become the mainstream in future remediation technologies.


2.Development of integrated and hybrid soil comprehensive remediation technology

Such as the combined remediation of plant and microbes, the integrated redox method, the rinsing method and the reaction wall technology, the new in situ composite repair technology, and the combination of phytoremediation and physical and chemical remediation.


3.Improving existing technology and attaching importance to theoretical research

For phytoremediation, more and better heavy metals can be enriched by finding, screening and domesticating them. Using genetic engineering technology, the tolerance genes of hyperconcentration plants are transplanted into plants with large biomass and rapid growth, so that the plant restoration will be industrialized.
For microbioremediation, gene engineering bacteria with strong resistance and strong decomposing ability can be developed through gene recombination. At the same time, we should further study the mechanism of bioremediation technology, further study the mechanism of plant microbial interaction, or understand the principles of tolerance genes and heavy metals accumulation. It will help to develop new plant varieties and improve the efficiency of the phytoremediation system. Before the introduction of hyperconcentration plants, it is also necessary to fully demonstrate whether it will cause the negative effects of biological invasion.

PARFECT soil stabilization equipment can transfer the soil binder through the air compressor to the mixing head which is mounted on the excavator, and mix with the soil to improve the strength of the foundation.

Learn more about in situ soil stabilization

评论

发表评论

此博客中的热门博文

Treatment of soft soil foundation by high pressure injection method

图片
The method is to use a drilling machine to inject a nozzle pipe into the soil layer. The slurry or water is ejected from the nozzle at high pressure to form a jet stream to destroy the soil layer. When the energy of high speed jet fluctuation was shaped, the dynamic pressure is greater than the strength of soil structure, soil particles stripping down from soil, part of the particles spread out with slurry or water, other soil particles mixed with slurry under the jet impact force, centrifugal force and gravity force, re arrange regularly according to the size of a certain percentage of soil and quality. After the slurry solidified, forming a solidified body in soil, can improve the bearing capacity of the foundation, reduce the settlement, can also improve the effecf of supporting and anti-seepage. It is suitable for foundations of silt, cohesive soil, loess, sandy soil, artificial fill and crushed stone soil. PARFECT soil stabilization equipment can transfer the soil binder t
阅读全文

Geotextile reinforcement method of soft soil foundation treatment

In order to improve the bearing capacity of foundation, reduce the settlement and increase the stability of foundation, the artificial composite soil can be subjected to tensile, compressive, shear or bending action. It is suitable for various soft foundations. The basic principle of reinforcement is to transfer the tensile stress in the soil to the reinforced body through the friction action between the soil and the reinforcement, and the reinforcement is subjected to pulling force. The stress and shear stress of the soil between the reinforcing bars can make the reinforcement and the soil in the reinforced soil play their respective roles. The common geotextiles include geogrids, geotextiles and geocell. In addition to geosynthetics and geogrids, geocell can delay or cut the sliding surface of foundation failure, so that the bearing capacity of foundation is improved. Moreover, geocell can in the soil compartment given three-dimensional constraint, the soil particles become a geocell
阅读全文

Traditional sludge disposal methods

图片
Most of the mud from the small ponds or river in the countryside is directly backfilled to farmlands nearby, which is the most common sludge disposal method used in rural areas in the past few decades. This sludge disposal method has many disadvantages: Some of the sludge has heavy metal pollution, or contains a lot of household waste and construction waste, and farmers refuse to accept it; After returning to the fields, it takes several years to dry. After airing, it needs second treatments. During this period, the fields can not be planted, and the government should pay farmers 1 ~ 2 years’ compensation fees in the form of rent. Cleaned out sludge of coastal rivers, lakes, ponds, and a considerable part of ithave been dumped at sea. In this way, the freight is expensive and tidal, and mud may be washed back inland. In Ningbo, China, the sludge being cleared will be dumped into sea which cost 176 RMB per cubic meter. The river silt in urban areas are often polluted, will usually
阅读全文